Specifications: Function: collect waste oil from vehicle gear box or engine Power: compressed air Air Consumption: 52 Gallons/min (200L/min.) Air Inlet Pressure(vacuum) 87~116Psi/6~8Bar Air Inlet Pressure (Oil ejection pressure) 10~14PSI/0.7~1Bar Vacuum Degree 0~-14Psi/0~-1Bar Tank Capacit...

Automatic device for filling of air conditioning systems for hybrid vehicles for which the manufacturer prescribes the use of R134a. Suit for: Hybrid car Refrigerant: R134a Mode: Fully-automatic Screen: LCD Specifications: Recovery speed: 180~350G/min Recharge speed: 800~1500G/min Vacuu...

Products for workshops and special tools Automatic Transmission Fluid Oil Exchanger is designed to accomplish the replacement of transmission cooling oils as well as torque converter and transmission radiator fluids in the shortest time with an exchange rate of more than 90 %. The mach...

Specifications: Functions - Remove, clean, and replace fluid from most types and models of automatic gearboxes, transmissions, hydraulic torque transmissions, gearbox radiators and radiation pipelines. Power supply - 220V, 50HZ，1PH Pump power - 250W Oil Inlet and Return Hoses - 3-(2x) 126...

Mobile unit for collection of waste oil through the oil filler hole with a help of probe, as well as in a traditional way, through the oil drain with the help of funnel. Collected oil falls into a special container and is being disposed. Intake of oil is made by compressed air pressure of ...

Cylinder for CT4101 Altoelsammler (1pc.) Instructions: - Air supply must be filtered of water and oil impurities before connecting to the bank. Air supply is to be 87psi ~ 116psi (6bar ~ 8bar) - Temperature of oil shouldn't be higher than 60°C, oil temperature of 40-60°C is suggested. - ...

Product Features: - Exclusive Deeptrans technology enhances fluid exchange performance bу 50%. - Patented Double Wall Tank design let new fluid become warm which gives protection to transmission and pipelines. - The high precision scale marks allows more accurate result of calibration a...

Features: - Fluid exchange can be done in 20 mins and exchanging speed is adjustable. - Automatic shut off when the new fluid volume reaches a minimum fluid level with a warning signal. - The tool case can be laid down to become an umbrella for the buttons and the meter during shippin...

Industrial hose reel Inlet/Outlet (inch) – 1/4’’ Max. pressure (psi/bar) – 218/15 Hose capacity (inch) – 1/4’’ Length (ft/m) – 50/15 Application – Air

Mobile unit is suitable for dispensing oil for mobile application. Drum trolley ensures high mobility and efficiency. Easy to move the drum in the workshop. Mobile unit for 200kgs Drum Standard model composed of grease pump, trolley, grease gun with z-swivel and connection hose. Product C...

This 9 litres transfer pump is suitable for filling of nearly all liquids. Suitable for all oils, antifreeze, water etc. Thanks to the chemical resistance, the non-corrosiveness and the temperature resistance of the HDPE construction this pump is also suitable for use in the industrial sec...

Features: - A large 9.0 L capacity - Manual fluid extractor can be used to extract many kinds of non-explosive liquids. - Completely using hand pump when you without shop air. - New safety design. when the tank is full of liquid, the vacuum will be shut off automatically. - Fast, cl...

Durable chemical resistant 3L sprayer, especially suitable for professional cleaning with aggressive solvents in hard to reach areas. Seals and lines are resistant to all common cleaning agents, solvents, petrol and oils.- 3 liter container made of robust cold-rolled stainless steel- Metal...

Professional stationary pneumatic oil pump for Workshops incl. compressor, tubes, tube coil.

Hand pump with telescopic pipe for barrels from 60 up to 208 liters. Oil, fuel, additives and other non-corrosive liquids can be pumped. The pump is equipped with a ergonimoical plastic handle. A high-quality chrome-plating guarantees durability. Suitable for drums of 47-90 cm height...

AH-02 Compressor Air Hose PU 10 m ist ein spiralförmiger Kompressorschlauch von 10 m Länge, der zur Druckluftversorgung von Druckluftwerkzeug bestimmt ist. Der Schlauch ist aus reiß-, feuer- und abnutzungsfestem Polyurethan gefertigt. Die einfach zu lösende Verbindung ...

Hand pump for barrels from 60 up to 208 liters. Oil, fuel, additives and other non-corrosive liquids can be pumped. The pump is equipped with a ergonimoical plastic handle. A high-quality chrome-plating guarantees durability. Suitable for drums of 47-90 cm height.