Main workshop equipment

A/C Recovery & recharge station for hybrid cars
CT4106
Automatic device for filling of air conditioning systems for hybrid vehicles for which the manufacturer prescribes the use of R134a.
Suit for: Hybrid car
Refrigerant: R134a
Mode: Fully-automatic
Screen: LCD
Specifications:
Recovery speed: 180~350G/min
Recharge speed: 800~1500G...
more...

Transmission Fluid Exchanger Electrical
CT4105
Automatic Transmission Fluid Oil Exchanger is designed to accomplish the replacement of transmission cooling oils as well as torque converter and transmission radiator fluids in the shortest time with an exchange rate of more than 90 %.The machine is equipped with a LCD display to make the...
more...

Transmission Fluid Exchanger Electrical
CT4104
Specifications:
Functions - Remove, clean, and replace fluid from most types and models of automatic gearboxes, transmissions, hydraulic torque transmissions, gearbox radiators and radiation pipelines.
Power supply - 220V, 50HZ,1PH
Pump power - 250W
Oil Inlet and Return Hoses - 3-(2x...
more...

Altoelsammler (Kompl.)
CT4101
Mobile unit for collection of waste oil through the oil filler hole with a help of probe, as well as in a traditional way, through the oil drain with the help of funnel. Collected oil falls into a special container and is being disposed. Intake of oil is made by compressed air pressure of ...
more...

Cylinder for Altoelsammler (item for CT4101)
2097
Cylinder for CT4101 Altoelsammler (1pc.) Instructions: - Air supply must be filtered of water and oil impurities before connecting to the bank. Air supply is to be 87psi ~ 116psi (6bar ~ 8bar) - Temperature of oil shouldn't be higher than 60°C, oil temperature of 40-60°C is suggested. - ...
more...

ATF Exchanger (PNEU)
CT4112
Product Features - Exclusive Deeptrans technology enhances fluid exchange performance bу 50%. - Patented Double Wall Tank design let new fluid become warm which gives protection to transmission and pipelines. - The high precision scale marks allows more accurate result of calibration and t...
more...

Electric Brake bleeder ELEC
CT4108
Features:
-Fluid exchange can be done in 20 mins and exchanging speed is adjustable.
- Automatic shut off when the new fluid volume reaches a minimum fluid level with a warning signal.
-The tool case can be laid down to become an umbrella for the buttons and the meter during shipping....
more...

Mobile Grease Pump Unit
9199
Mobile unit is suitable for dispensing oil for mobile application. Drum trolley ensures high mobility and efficiency. Easy to move the drum in the workshop. Mobile unit for 200kgs Drum Standard model composed of grease pump, trolley, grease gun with z-swivel and connection hose.
Product C...
more...

Manual Fluid Dispenser System
9337
This 9 litres transfer pump is suitable for filling of nearly all liquids. Suitable for all oils, antifreeze, water etc. Thanks to the chemical resistance, the non-corrosiveness and the temperature resistance of the HDPE construction this pump is also suitable for use in the industrial sec...
more...

Oil Extractor
9317
This 9 litres transfer pump is suitable for filling and drawing off of nearly all liquids. Suitable for all oils, antifreeze, water etc. Thanks to the chemical resistance, the non-corrosiveness and the temperature resistance of the HDPE construction this pump is also suitable for use in th...
more...

Pressure Sprayer steel manual
9370
Durable chemical resistant 3L sprayer, especially suitable for professional cleaning with aggressive solvents in hard to reach areas. Seals and lines are resistant to all common cleaning agents, solvents, petrol and oils.- 3 liter container made of robust cold-rolled stainless steel- Metal...
more...

Pneumatic Pump Set
PP 9299
Professional stationary pneumatic oil pump for Workshops incl. compressor, tubes, tube coil.
more...

Lever Type Drum Pump
9316
Hand pump with telescopic pipe for barrels from 60 up to 208 liters. Oil, fuel, additives and other non-corrosive liquids can be pumped. The pump is equipped with a ergonimoical plastic handle. A high-quality chrome-plating guarantees durability. Suitable for drums of 47-90 cm height...
more...

Compressor Air Hose PU (10m)
AH-02
AH-02 Compressor Air Hose PU 10 m is a spiral compressor hose of 10 m length, designed for supplying air tools with compressed air. The hose is made of polyurethane and it is resistant to wear, tear as well as fire. The coupling is easily released and ensures a quick and comfortable connec...
more...

Oil pump
9316/1
Hand pump for barrels from 60 up to 208 liters. Oil, fuel, additives and other non-corrosive liquids can be pumped. The pump is equipped with a ergonimoical plastic handle. A high-quality chrome-plating guarantees durability. Suitable for drums of 47-90 cm height.
more...
Wrenches and wrench sets

Oil Drain Plug Key Set (12pc)
C1001
Suitable for sump plugs on engine, gearbox and back axle. 3/8" hex - 5/16" square; 8mm hex - 3/8" square; 9mm hex - 11mm square; 10mm hex - 13mm square; 12mm hex - 17mm square; 14mm hex - 16mm lenght tommy bar
more...

Filter Wrench Set (23pc)
A1013
23pc Aluminum Oil Filter Cup Wrench Set includes: 1x 65mm; 1x 67mm; 2x 73mm; 5x 74mm; 2x 75mm;1x 76mm; 1x 79mm; 1x 79.5mm; 1x 84mm; 1x 89mm; 1x 90mm; 1x 91mm; 1x 92mm; 1x 95mm; 1x 101mm; 1/2" Dr. Ratchet Handle; 12 Point 22mm wrench
more...

Filter Wrench Set (9pc)
A1049
9pc Oil Filter Wrench Set includes: 2x 14 Flutes - 64.5mm; 1x 15 Flutes - 88.2mm; 1x 16 Flutes - 74.2mm; 1x Hex - 27mm; 1x Hex - 32mm; 1x Hex - 36mm; 1x Adjustable Grip Socket: workable range 63-83mm
more...

Filter Wrench
A1065
Universal oil filter wrench for 80-115 mm filters. Designed for quick and easy removing and installation of oil filters. Applicable with either an 1/2'' drive or a 21 mm spanner. The arm length (working area or depth respectively) is ca. 3 cm. Colour: black. Industrial quality recommended ...
more...

Filter Wrench
A1066
Universal oil filter wrench for 110-140 mm filters. Designed for quick and easy removing and installation of oil filters. Applicable with either an 1/2'' drive or a 21 mm spanner. The arm length (working area or depth respectively) is ca. 3 cm. Colour: black. Industrial quality recommended...
more...

Oil Filter Wrench
9311
Universal oil filter wrench for Spin-On Filters with diameter 51-111mm.
more...

Oil filter wrench set (15pc)
9312
Oil Filter Wrench Set (15 pcs). HC - 74/76 mm - 15 flutes - 2 step HC - 74/76 mm - 14 flutes - 2 step HC - 93 mm - 15 flutes - 1 step HC - 65/67 mm - 14 flutes - 2 step HC - 73 mm - 14 flutes - 1 step HC - 80 mm - 15 flutes - 1 step HC - 68 mm - 14 flutes - 1 step HC - 93 mm - 36 flutes - ...
more...
Extra tools for workshops

Fender Cover (magnet)
MN1065
Protective cover for fenders with magnetic closure and MANNOL logo.Designed to protect the front fender of cars during repair and maintenance work in the engine compartment while the bonnet is open. Protects the fender of the vehicle against scratches, oil as well as dirt and increases the...
more...

Car Creeper
PP01532
Size: Length- 86,5 cm., width 39 cm., Height- 9.5 cm.
more...

Oil Drain Pan (15L)
F1004
Oil collector for collecting waste oil of vehicles with an integrated funnel and practical large handles. Ideal for easier and cleaner oil changes.
Product Characteristics:
Characteristics
Method
Unit
Value
Capacity
L
15
Colour
black
Diameter
cm
46 (1...
more...

Oil Drain Pan (7L)
F1005
Oil drain pan used to collect old oil from vehicles for an easier and cleaner oil change.
Product Characteristics:
Characteristics
Method
Unit
Value
Capacity
L
7
Colour
black
Diameter
cm
34
Height
cm
10
Material
polypropylene
...
more...

Oil Leak Stop Kit
PP01613
Tool for leak testing/inspection of auto oil filters. Adapter measurements: 1-12UNF; 3/4-16UNF; 11/8-16UNF; 13/16-16UNF M12x1.5; M16x1.5; M18X1.5; M30x1.5; M22x1.5
more...

Grease Gun
9310
Grease gun for grease dosing from 400g grease cartridges. High-quality design with galvanized grease tank, ergonomically shaped handle and two 300 mm safety reinforced rubber hoses. with galvanized grease tank, ergonomically shaped handle and 2 x 300 mm safety reinforced rubber hoses.Pull ...
more...
Dispensing taps / tubes

Dispensing Tap for 20L Drum
DIN61
The innovative Dispensing Taps for 20 L MANNOL containers and 1,000 L IBC containers enable easy, clean and fast dispensing of liquids without clucking. Thanks to the patented ventilation system, the Dispensing Tap offers a very high discharge capacity with a flow rate of > 10 L/min. Di...
more...

CT4503 Flexible Tube (20L)
PP 4503
A flexible tube is a pumping device for engine oils and technical fluids that screws onto the container opening and allows the contents to flow quickly, safely and easily to their destination. It is no longer necessary to use a funnel and spill risk is greatly reduced. Suitable for MANNOL ...
more...

MANNOL Automaster Hand Gel Pump (5L)
9558
Pump/Soap Dispenser for accurate and makes your soap last longer
- Compatible with hand wash paste Auto Master 9957 5 liter- Also suitable for other container with a diameter of 40 mm screw thread- Length flow tube 215 mm (from door)- Handy pump dispenser....
more...

Dispensing Tap for 60/200L Drum
DIN-G3/4
Dispensing Tap for 60 and 200 Liter containers and drums are perfectly suitable for simple, clean and quick refilling of fluids without gurgling. Dispensing Tap are leak proof even with aggressive chemical compounds and strongly creeping fluids.
more...

CT4504 Flexible Tube (10L)
PP 4504
Flexible funnel for 10 liter canisters for motor oils and technical liquids. The funnel is screwed onto the neck of the canister, which prevents unnecessary leakage of liquid during transfusion.
more...
Steel and plastic clamps

L300 Cable Ties white 4x300
L300
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
more...

BL300 Cable Ties black 4x300
BL300
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
more...

L450 Cable Ties 5x450
L450
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
more...

BL450 Cable Ties 5x450
BL450
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
more...

L700 Cable Ties 10x700
L700
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
more...

BL700 Cable Ties Black 10x700
BL700
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
more...

Clamp D8-16
D8-16
Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the u...
more...

Clamp D12-22
D12-22
Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the u...
more...

Clamp D20-32
D20-32
Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the u...
more...

Clamp D32-50
D32-50
Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the u...
more...

Clamp D70-90 (st)
D70-90
Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the u...
more...

Clamp D50-70
D50-70
Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the u...
more...

L150 Cable Ties 3.6x150
L150
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
more...